Skip to content
BEST HOME THEATER REVIEW
Bowers & Wilkins 603 S3

Bowers & Wilkins ยท High-End Speakers

Bowers & Wilkins 603 S3

87/100 #6 of 7 high-end speakers $2,000โ€“$2,600 per pair Released 2023

Quick answer

B&W's entry-level 3-way tower adds a titanium dome tweeter and Continuum midrange from the pricier lines, offering refined, detailed sound at the lower end of high-end.

Best forMedium rooms wanting refined, detailed sound from a known brand
Skip it ifYou prefer a warm sound or need maximum volume per watt

Bowers & Wilkins 603 S3 Specs

Type3-way floorstanding
Drivers25 mm decoupled titanium dome tweeter; 150 mm Continuum cone midrange; dual 165 mm bass drivers
Impedance8 ohms
FinishBlack, white or oak

BHTR Score: 87/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Sound quality89
Build & finish88
Ease to drive82
Value84

Our Verdict

The 603 S3 is the floorstander in the latest (S3) generation of Bowers & Wilkins's 600 Series: a 3-way design with a 25 mm (1-inch) decoupled titanium dome tweeter, a 150 mm (6-inch) Continuum cone midrange and two 165 mm (6.5-inch) bass drivers, rated at 8 ohms. The titanium tweeter is the headline upgrade for this generation.

Show the maths. Setup matters as much as the spec sheet. B&W towers sound their best when the tweeters aim near the listener. With speakers 2.5 m (8.2 ft) apart and the seat 3 m (10 ft) back, each speaker sits 1.25 m to the side of your line of sight, so toe it in about 23 degrees (atan 1.25 รท 3) to point directly at you. Many owners prefer slightly less, aiming just behind the head, for a wider soundstage.

The Continuum midrange matters for dialogue. In a 3-way, voices stay in the midrange driver, and Continuum is B&W's cone material designed to avoid the ringing of stiffer cones, which keeps speech clear. Two 6.5-inch bass drivers equal one driver about 6.5 ร— โˆš2 โ‰ˆ 9.2 inches across, enough to fill a medium room.

The 8-ohm rating is friendly to AV receivers (impedance explained). Pair with a subwoofer at 80 Hz for movies (crossover basics).

The trade-off: it's less efficient than horns and leaner than warmer rivals in bright rooms. B&W's own 600 Series center matches the tweeter if you want seamless pans. See our best high-end home theater speakers, and compare with the Focal Aria Evo X No2.

Pros

  • Titanium dome tweeter brought down from pricier B&W lines
  • Continuum midrange for clear dialogue
  • Easy 8-ohm load for AV receivers
  • Elegant, compact tower design

Cons

  • Can sound lean in bright rooms
  • Less efficient than horn-loaded rivals
  • Matching center sold separately

Alternatives to the Bowers & Wilkins 603 S3

Bowers & Wilkins 603 S3 FAQ

Is the B&W 603 S3 good for home theater?

Yes. Its 3-way design keeps dialogue clear, and the 8-ohm load is easy on AV receivers. Add B&W's matching 600 Series center for seamless pans, and a subwoofer at 80 Hz for movie bass.

How should I set up the B&W 603 S3?

Start with the speakers about as far apart as your seat is from them, and toe them in to point near your ears. Leave space behind them, and adjust toe-in until voices lock to the center of the screen.

Is the Bowers & Wilkins 603 S3 worth it?

B&W's entry-level 3-way tower adds a titanium dome tweeter and Continuum midrange from the pricier lines, offering refined, detailed sound at the lower end of high-end. It scores 87/100 on our BHTR Score, ranking #6 of the 7 high-end speakers we track. It is best for medium rooms wanting refined, detailed sound from a known brand; skip it if you prefer a warm sound or need maximum volume per watt.