Skip to content
BEST HOME THEATER REVIEW
Elite Screens Sable Frame 2

Elite Screens ยท Projector Screens

Elite Screens Sable Frame 2

83/100 #3 of 7 projector screens $250โ€“$400

Quick answer

A low-cost fixed-frame screen with Elite's 1.1-gain CineWhite material and a velvet frame, a solid match for dark rooms.

Best forDark home theaters and basements on a budget
Skip it ifYour room has windows or lights you cannot control during viewing

Elite Screens Sable Frame 2 Specs

Size120 in. diagonal (other sizes available)
Aspect ratio16:9
Gain1.1
MaterialCineWhite (matte white)
TypeFixed frame
ALRNo
FrameAluminum, black velvet-covered

BHTR Score: 83/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Picture quality83
Ambient light handling56
Value88
Ease of install82

Our Verdict

The Elite Screens Sable Frame 2 is a fixed-frame, 16:9 screen using Elite's CineWhite matte white material, rated at 1.1 gain, stretched over a black velvet-covered aluminum frame. It is sold in a range of sizes; 120" is the common home theater pick.

The gain number tells you how much light comes back. On a 120" screen (about 42.7 sq ft), a projector rated at 3,000 lumens, like the Epson Home Cinema 3800, returns roughly 3,000 x 1.1 / 42.7 = 77 foot-lamberts at its rated output. A 3,200-lumen laser model such as the BenQ TK710 would give about 82. Calibrated output is always lower than the rated figure, but both have headroom in a dark room. A 1.1 gain is close enough to neutral that viewing angles stay wide and even, which matters for a sofa that runs off-center.

What you do not get is ambient light rejection: a white screen reflects room light as readily as projector light, so blacks gray out with lamps on. Assembly is straightforward but best done by two people, and the tension springs need even attention to get a flat surface. If your room is light-controlled, it is one of the best-value screens available; for living rooms, step up to the Elite Screens Sable Frame CineGrey 3D. More in our best projector screen guide.

Pros

  • CineWhite 1.1-gain surface with wide viewing angles
  • Tensioned fixed frame keeps the surface flat
  • Black velvet border sharpens image edges
  • Many sizes available

Cons

  • No ambient light rejection
  • Two-person assembly
  • Not designed for ultra short throw projectors

Alternatives to the Elite Screens Sable Frame 2

Elite Screens Sable Frame 2 FAQ

What does 1.1 gain mean on the Elite Sable Frame 2?

It reflects about 10 percent more light toward the center seat than a reference 1.0 white surface. That small boost keeps viewing angles wide while adding a little brightness, a good balance for most dark rooms.

Is the Elite Sable Frame 2 good for 4K?

Yes. CineWhite is a smooth matte surface suited to 4K projectors, and the fixed frame keeps it flat so fine detail stays sharp.

Is the Elite Screens Sable Frame 2 worth it?

A low-cost fixed-frame screen with Elite's 1.1-gain CineWhite material and a velvet frame, a solid match for dark rooms. It scores 83/100 on our BHTR Score, ranking #3 of the 7 projector screens we track. It is best for dark home theaters and basements on a budget; skip it if your room has windows or lights you cannot control during viewing.

What is a cheaper alternative to the Elite Screens Sable Frame 2?

The Akia Screens Fixed Frame Screen ($150โ€“$300) scores 74/100. A budget 120" fixed-frame matte white screen that gets you a flat, framed image for little money in a dark room.