Skip to content
BEST HOME THEATER REVIEW
Monolith M-10 V2 Subwoofer

Monoprice · Subwoofers

Monolith M-10 V2 Subwoofer

80/100 #6 of 22 subwoofers $650–$750

Quick answer

A THX Certified Select 10-inch sub with a 500 W RMS amp, an HDF cabinet and a port plug for sealed mode, rated for rooms up to 2,000 cubic feet.

Best forRooms up to about 2,000 cubic feet that want THX-level output from a compact box
Skip it ifYou want app-based EQ or a 12-inch driver for a larger room

Monolith M-10 V2 Subwoofer Specs

Driver10-inch
Amplifier500 W RMS / 900 W peak, Class D with TI 48-bit DSP
EnclosureVented HDF cabinet with internal bracing; foam plug for sealed mode
InputsBalanced XLR and RCA
App/EQNone (use your receiver's room correction)

BHTR Score: 80/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Output for the money84
Low-frequency extension76
Build & features82
Ease of setup78

Our Verdict

The Monolith M-10 V2 packs a 10-inch driver and a 500 W RMS (900 W peak) Class D amp into a braced HDF cabinet, and carries THX Certified Select status. THX Select covers rooms up to 2,000 cu ft with a 10–12 ft viewing distance, so you get a ready-made room check: a 15 × 16 ft room with an 8 ft ceiling is 1,920 cu ft, right on target.

Show the maths. Against the SVS SB-1000 Pro at 325 W, 10 × log10(500 ÷ 325) = 1.9 dB more amp headroom. The 10-inch cone is the trade-off: (10 ÷ 12)² = 0.69× the area of a 12-inch, about 1.6 dB less output at the same excursion. The big amp and THX tuning are there to make up that gap.

Ported or sealed. The single port comes with a foam plug. Ported gives more output in the deepest octave; sealed rolls off more gently, which suits a room where the sub sits near a corner and room gain lifts the low end. Bass gets harder as it goes lower: each octave down needs about four times the cone movement.

You also get balanced XLR as well as RCA inputs, handy for long runs. There is no app, so use your receiver's room correction and an 80 Hz crossover. It is a strong value pick in our best subwoofer for home theater guide.

Pros

  • THX Certified Select for rooms up to 2,000 cu ft
  • 500 W RMS / 900 W peak amplifier
  • Port plug lets you run it ported or sealed
  • Balanced XLR and RCA inputs

Cons

  • No app or built-in room EQ
  • 10-inch driver has less cone area than 12-inch rivals
  • Plainer finish than SVS or REL

Alternatives to the Monolith M-10 V2 Subwoofer

Compare the Monolith M-10 V2 Subwoofer

Monolith M-10 V2 Subwoofer FAQ

What does THX Certified Select mean for a subwoofer?

THX Select targets rooms up to about 2,000 cubic feet with seats 10 to 12 feet from the screen. A certified sub met THX's output and distortion criteria for reference level in that size of room.

Should I run the Monolith M-10 V2 ported or sealed?

Ported gives more output in the deepest octave, which suits larger rooms. Sealed, with the foam plug in, rolls off more gently and often works better near a corner in a smaller room.

Is the Monolith M-10 V2 Subwoofer worth it?

A THX Certified Select 10-inch sub with a 500 W RMS amp, an HDF cabinet and a port plug for sealed mode, rated for rooms up to 2,000 cubic feet. It scores 80/100 on our BHTR Score, ranking #6 of the 22 subwoofers we track. It is best for rooms up to about 2,000 cubic feet that want THX-level output from a compact box; skip it if you want app-based EQ or a 12-inch driver for a larger room.

What is a cheaper alternative to the Monolith M-10 V2 Subwoofer?

The Klipsch R-120SW ($300–$400) scores 78/100. A 12-inch front-firing sub with plenty of output for medium rooms at a budget price, but it rolls off earlier than sealed or ported rivals from SVS.