Skip to content
BEST HOME THEATER REVIEW
Denon AVR-X4800H

Denon · AV Receivers

Denon AVR-X4800H

88/100 #2 of 15 av receivers $2,200–$2,600

Quick answer

The X3800H's 9.4-channel, 11.4-processing platform with 125 W/ch and more HDMI inputs, for larger rooms or less sensitive speakers.

Best forLarge rooms and lower-sensitivity speakers in a 5.1.4 or 7.1.4 build
Skip it ifThe X3800H already covers your room; the extra power is under 1 dB

Denon AVR-X4800H Specs

Channels9.4 (11.4 processing)
Power (rated)125 W/ch (8 Ω, 20 Hz–20 kHz, 0.05% THD, 2 ch driven)
HDMI inputs8 in / 3 out
8K/4K120 HDMIYes (8K/60, 4K/120 pass-through)
Room correctionAudyssey MultEQ XT32; Dirac Live (paid upgrade)
Atmos/DTS:XDolby Atmos, DTS:X, Auro-3D, IMAX Enhanced; up to 7.1.4 with external amp
StreamingHEOS, AirPlay 2, Bluetooth
Pre-outs11.4-channel (4 independent subwoofer)

BHTR Score: 88/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Power & channels92
Room correction92
Video & HDMI90
Streaming & ease of use82

Our Verdict

The AVR-X4800H shares the key layout of the AVR-X3800H: nine amplified channels, 11.4-channel processing, and four independent subwoofer outputs. Nine amps give you 5.1.4 or 7.1.2, and adding a two-channel amp takes you to 7.1.4.

The headline difference is power: 125 W/ch (8 Ω, 20 Hz–20 kHz, 0.05% THD, 2 ch driven) against 105 W. Run the numbers: 10 × log10(125 ÷ 105) = 0.76 dB. On paper, that is a modest gain. The bigger benefit is a stronger amp section and power supply, which helps when you push nine channels hard in a large room.

Here is a room check. With 86 dB speakers and a 4 m seat (about 12 dB of distance loss from 1 m), 125 W gives roughly 86 + 21 = 107 dB at 1 m and about 95 dB at the seat. That is fine for most viewers, but if you aim for reference peaks with low-sensitivity speakers, an external amp for the fronts is still the smarter upgrade.

You also get Audyssey MultEQ XT32, a paid Dirac Live upgrade, and 8 HDMI inputs. If your room and speakers are average, the X3800H delivers nearly the same result for less. Compare both in our best home theater receiver guide.

Pros

  • 125 W/ch rating is the highest of Denon's 9-channel AVRs here
  • Nine amps plus 11.4 processing for 7.1.4 with an external amp
  • Four independent subwoofer outputs
  • Audyssey MultEQ XT32 with optional Dirac Live
  • Eight HDMI inputs and three outputs

Cons

  • Under 1 dB more headroom than the cheaper X3800H
  • Dirac Live costs extra
  • Large and heavy

Alternatives to the Denon AVR-X4800H

Denon AVR-X4800H FAQ

AVR-X4800H vs AVR-X3800H: which should I buy?

For most rooms, the X3800H. Both have nine amplified channels, 11.4 processing and four sub outputs. The X4800H's 125 W rating adds about 0.76 dB over 105 W, plus more HDMI inputs. Pick it for large rooms or less sensitive speakers.

How many speakers can the AVR-X4800H power?

Nine directly, for a 5.1.4 or 7.1.2 layout, plus up to four subwoofers. With a two-channel power amplifier on its pre-outs, it can run a full 7.1.4 system.

Is the Denon AVR-X4800H worth it?

The X3800H's 9.4-channel, 11.4-processing platform with 125 W/ch and more HDMI inputs, for larger rooms or less sensitive speakers. It scores 88/100 on our BHTR Score, ranking #2 of the 15 av receivers we track. It is best for large rooms and lower-sensitivity speakers in a 5.1.4 or 7.1.4 build; skip it if the X3800H already covers your room; the extra power is under 1 dB.

What is a cheaper alternative to the Denon AVR-X4800H?

The Denon AVR-X3800H ($1,600–$2,000) scores 89/100. Nine amplified channels, 11.4-channel processing, four independent sub outputs and Audyssey XT32 with a Dirac Live upgrade path make this the best-value receiver for a serious 5.1.4 or 7.1.4 room.