Skip to content
BEST HOME THEATER REVIEW
Denon AVR-S770H

Denon · AV Receivers

Denon AVR-S770H

80/100 #10 of 15 av receivers $550–$700 Released 2022

Quick answer

A 7.2-channel Denon with 8K-ready HDMI and HEOS streaming that can run a full 5.1.2 Dolby Atmos layout, but its basic Audyssey MultEQ and 75 W rating suit efficient speakers in small to medium rooms.

Best forFirst Atmos system with efficient speakers in a small or medium room
Skip it ifYou plan to add four height speakers or want stronger room correction

Denon AVR-S770H Specs

Channels7.2
Power (rated)75 W/ch (8 Ω, 20 Hz–20 kHz, 0.08% THD, 2 ch driven)
HDMI inputs6 in / 1 out
8K/4K120 HDMIYes (8K/60, 4K/120 pass-through)
Room correctionAudyssey MultEQ
Atmos/DTS:XDolby Atmos and DTS:X, up to 5.1.2
StreamingHEOS, AirPlay 2, Bluetooth
Pre-outs2 subwoofer

BHTR Score: 80/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Power & channels76
Room correction72
Video & HDMI86
Streaming & ease of use86

Our Verdict

The AVR-S770H has seven amplified channels, so the maths is simple: five ear-level speakers plus two height speakers is seven, which gives you a complete 5.1.2 Dolby Atmos system, or 7.1 with no heights. It cannot reach 5.1.4 or 7.1.4, and there are no main-channel pre-outs for adding an amp later.

Denon rates it at 75 W/ch (8 Ω, 20 Hz–20 kHz, 0.08% THD, 2 ch driven). That two-channel figure is the best case. With all seven channels busy, they share one power supply, so real multichannel output is lower. Here is why that rarely matters in a normal room: loudness at 1 m = sensitivity + 10 × log10(watts). A 90 dB sensitivity speaker fed 75 W reaches about 108.8 dB at 1 m, or roughly 99 dB at a seat 3 m away. Halve the power and you lose only 3 dB. With 85 dB speakers, that same seat tops out near 94 dB, which is loud but short of reference peaks.

Room correction is entry-level Audyssey MultEQ, not MultEQ XT or XT32. If you want finer EQ, the Denon AVR-X1800H is the next step up. See the full ranking in our best home theater receiver guide.

Pros

  • Seven channels run a full 5.1.2 Dolby Atmos layout
  • 8K/60 and 4K/120 pass-through for current consoles and TVs
  • HEOS, AirPlay 2 and Bluetooth built in
  • Denon's guided setup is easy for first-timers

Cons

  • Basic Audyssey MultEQ has less filter resolution than XT or XT32
  • No main-channel pre-outs, so no path to 5.1.4 later
  • 75 W/ch rating needs efficient speakers for big rooms

Alternatives to the Denon AVR-S770H

Compare the Denon AVR-S770H

Denon AVR-S770H FAQ

Can the Denon AVR-S770H do Dolby Atmos?

Yes. It decodes Dolby Atmos and DTS:X and has seven amplified channels, so it can power a 5.1.2 layout with two height or upfiring speakers. It cannot run four height speakers, so 5.1.4 and 7.1.4 are out of reach.

What is the difference between the AVR-S770H and AVR-X1800H?

Both are 7.2-channel receivers. The X1800H adds Audyssey MultEQ XT for finer room correction and a slightly higher 80 W/ch rating. The power gain is about 0.3 dB, so the real reason to step up is the better EQ, not loudness.

Is the Denon AVR-S770H worth it?

A 7.2-channel Denon with 8K-ready HDMI and HEOS streaming that can run a full 5.1.2 Dolby Atmos layout, but its basic Audyssey MultEQ and 75 W rating suit efficient speakers in small to medium rooms. It scores 80/100 on our BHTR Score, ranking #10 of the 15 av receivers we track. It is best for first Atmos system with efficient speakers in a small or medium room; skip it if you plan to add four height speakers or want stronger room correction.

What is a cheaper alternative to the Denon AVR-S770H?

The Yamaha RX-V4A ($450–$600) scores 73/100. A 5.2-channel Yamaha with MusicCast streaming and YPAO calibration that decodes Atmos but has no channels for real height speakers.