Skip to content
BEST HOME THEATER REVIEW
Fosi Audio V3 Amplifier

Fosi Audio ยท Amplifiers

Fosi Audio V3 Amplifier

72/100 #7 of 7 amplifiers $100โ€“$200

Quick answer

A tiny, low-cost Class D stereo amp built on the TI TPA3255 chip, good for powering passive speakers on a budget but bare on inputs and features.

Best forBudget stereo setups with efficient passive speakers
Skip it ifYou need digital inputs, a sub output or HDMI

Fosi Audio V3 Amplifier Specs

Channels2
ClassD (Texas Instruments TPA3255)
InputsLine-level RCA
FeaturesExternal DC power supply

BHTR Score: 72/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Power for the money86
Connectivity58
Build quality70
Ease of setup74

Our Verdict

The Fosi V3 is a compact Class D stereo amplifier built around Texas Instruments' TPA3255 chip and powered by an external DC supply. It is a no-frills way to drive a pair of passive bookshelf speakers from a TV, streamer or DAC.

We have not listed a single power figure because Class D amps like this deliver different output depending on the supply voltage and speaker impedance, and marketing numbers are often peak figures. Instead, do the maths for your room. Loudness at 1 m = sensitivity + 10 ร— log10(watts), and you lose about 9.5 dB by a 3 m seat. To hit 100 dB peaks at 3 m with 86 dB speakers, you need 86 + 10 ร— log10(P) โˆ’ 9.5 = 100, so P is about 224 W. With 90 dB speakers, the same target needs only about 89 W.

That 4 dB of sensitivity cuts the power needed by more than half, which is why efficient speakers suit a compact amp. For everyday TV listening around 85 dB at the seat, the same 86 dB speakers need under 10 W.

What you give up: there is no digital input, so the TV needs an analog output or a separate DAC, and there is no subwoofer output. For a TV system with more connections, the Yamaha A-S501 is a big step up. See the best home theater amplifier guide.

Pros

  • Very low price
  • TPA3255 Class D chip runs cool and efficient
  • Small enough to hide behind a TV

Cons

  • No digital inputs
  • No subwoofer output
  • Output depends on the power supply and speaker load

Alternatives to the Fosi Audio V3 Amplifier

Fosi Audio V3 Amplifier FAQ

Can the Fosi Audio V3 power home theater speakers?

It can power a pair of passive speakers for stereo TV sound. It has no surround decoding, no digital input and no sub output, so pair it with a TV that has an analog output or use an external DAC.

How much power do I really need?

With 90 dB speakers, about 89 W reaches 100 dB peaks at 3 m; with 86 dB speakers you need about 224 W. Everyday TV listening at around 85 dB needs under 10 W.

Is the Fosi Audio V3 Amplifier worth it?

A tiny, low-cost Class D stereo amp built on the TI TPA3255 chip, good for powering passive speakers on a budget but bare on inputs and features. It scores 72/100 on our BHTR Score, ranking #7 of the 7 amplifiers we track. It is best for budget stereo setups with efficient passive speakers; skip it if you need digital inputs, a sub output or HDMI.