Skip to content
BEST HOME THEATER REVIEW
Yamaha A-S501 Integrated Amplifier

Yamaha · Amplifiers

Yamaha A-S501 Integrated Amplifier

80/100 #5 of 7 amplifiers $500–$700 Released 2015

Quick answer

An 85 W/ch stereo integrated amp with a built-in DAC, phono stage and subwoofer output, a good base for a 2.1 TV and music system.

Best for2.1 systems for music and TV in one room
Skip it ifYou want surround sound or HDMI connections

Yamaha A-S501 Integrated Amplifier Specs

Channels2
Power (rated)85 W/ch (8 Ω, 20 Hz–20 kHz, 0.019% THD)
ClassAB
InputsOptical and coaxial digital, phono (MM), line-level RCA
FeaturesBuilt-in DAC, subwoofer output, Pure Direct mode, tone controls

BHTR Score: 80/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Power for the money80
Connectivity84
Build quality80
Ease of setup78

Our Verdict

The A-S501 is a stereo integrated amplifier, not a surround receiver. It makes sense in a 2.0 or 2.1 setup where music matters as much as movies, with the TV feeding it over optical.

Yamaha rates it at 85 W/ch (8 Ω, 20 Hz–20 kHz, 0.019% THD). Compare that with the Denon PMA-600NE at 45 W/ch into 8 Ω: 10 × log10(85 ÷ 45) = 2.8 dB more headroom. That is close to the 3 dB you get from doubling power, and it is audible with less sensitive bookshelf speakers.

Room maths: with 87 dB sensitivity speakers, 85 W gives 87 + 19.3 = about 106 dB at 1 m, or about 97 dB at a 3 m seat. That covers loud movie nights in a living room, especially if the subwoofer output sends bass to a powered sub. A sub such as the SVS SB-1000 Pro takes the deepest notes off the amp entirely and lets the speakers play louder cleanly.

The built-in DAC (optical and coaxial) and MM phono stage make it a tidy hub for a TV, turntable and streamer. What you give up is surround: no center channel, no surrounds, no Atmos. If you want those, start with our best home theater receiver guide instead.

Pros

  • 85 W/ch rated at 8 Ω, 20 Hz–20 kHz, 0.019% THD
  • Optical and coaxial DAC for TV audio
  • Subwoofer output for a 2.1 system
  • MM phono stage for a turntable

Cons

  • Stereo only: no surround or Atmos
  • No HDMI or eARC
  • No built-in streaming

Alternatives to the Yamaha A-S501 Integrated Amplifier

Yamaha A-S501 Integrated Amplifier FAQ

Can I use the Yamaha A-S501 for home theater?

For a 2.0 or 2.1 setup, yes. Connect the TV's optical output to the amp and add a powered subwoofer to the sub output. It does not decode surround sound, so there is no center, surround or Atmos channel.

Is 85 watts per channel enough?

For most living rooms with speakers rated around 87 dB or higher, yes. That gives about 106 dB at 1 m and about 97 dB at a 3 m seat.

Is the Yamaha A-S501 Integrated Amplifier worth it?

An 85 W/ch stereo integrated amp with a built-in DAC, phono stage and subwoofer output, a good base for a 2.1 TV and music system. It scores 80/100 on our BHTR Score, ranking #5 of the 7 amplifiers we track. It is best for 2.1 systems for music and TV in one room; skip it if you want surround sound or HDMI connections.

What is a cheaper alternative to the Yamaha A-S501 Integrated Amplifier?

The Fosi Audio V3 Amplifier ($100–$200) scores 72/100. A tiny, low-cost Class D stereo amp built on the TI TPA3255 chip, good for powering passive speakers on a budget but bare on inputs and features.