Skip to content
BEST HOME THEATER REVIEW
Denon PMA-600NE Integrated Amplifier

Denon · Amplifiers

Denon PMA-600NE Integrated Amplifier

77/100 #6 of 7 amplifiers $450–$600

Quick answer

A stereo integrated amp with Bluetooth, a built-in DAC and a phono stage, rated at 45 W/ch into 8 Ω and best matched with efficient speakers in a small room.

Best forSmall rooms with efficient speakers for TV and music
Skip it ifYou have low-sensitivity speakers or a large room

Denon PMA-600NE Integrated Amplifier Specs

Channels2
Power (rated)45 W/ch into 8 Ω; 70 W/ch into 4 Ω
ClassAB
InputsBluetooth, optical and coaxial digital, phono (MM), line-level RCA
FeaturesBuilt-in DAC, Analog Mode, tone controls

BHTR Score: 77/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Power for the money70
Connectivity84
Build quality78
Ease of setup80

Our Verdict

The PMA-600NE is a stereo integrated amplifier for a 2.0 or 2.1 TV and music system. It connects to the TV over optical or coaxial, streams from your phone over Bluetooth and has a moving-magnet phono stage.

Denon rates it at 45 W/ch into 8 Ω and 70 W/ch into 4 Ω. Here is what that means. Loudness at 1 m = sensitivity + 10 × log10(watts), and 10 × log10(45) is 16.5 dB. With 87 dB sensitivity speakers, that is about 103.5 dB at 1 m and roughly 94 dB at a 3 m seat. With efficient 90 dB speakers, you gain 3 dB, the same as doubling the amp's power.

That is the key buying lesson: choose efficient speakers with this amp. Against the Yamaha A-S501 at 85 W/ch, the Denon gives up 10 × log10(85 ÷ 45) = 2.8 dB. A speaker that is 3 dB more sensitive closes that gap completely. Note that 4 Ω speakers draw more current; check your speakers' impedance before you assume the 70 W figure applies.

Analog Mode switches off the digital circuits for cleaner analog playback. It is a strong choice for a small room. For surround sound, see our best budget home theater receiver guide.

Pros

  • Bluetooth, optical and coaxial inputs
  • Built-in DAC and MM phono stage
  • Analog Mode disables digital circuits for analog playback
  • Simple Bluetooth streaming from a phone

Cons

  • 45 W/ch into 8 Ω needs efficient speakers
  • Stereo only: no surround or HDMI
  • No Wi-Fi streaming

Alternatives to the Denon PMA-600NE Integrated Amplifier

Denon PMA-600NE Integrated Amplifier FAQ

Is the Denon PMA-600NE powerful enough?

With efficient speakers in a small or medium room, yes. With 87 dB speakers, 45 W gives about 103.5 dB at 1 m and roughly 94 dB at 3 m. Low-sensitivity speakers or larger rooms call for more power.

Can the Denon PMA-600NE connect to a TV?

Yes. Use the TV's optical output into one of the amp's digital inputs. It plays stereo only, so surround tracks are downmixed by the TV.

Is the Denon PMA-600NE Integrated Amplifier worth it?

A stereo integrated amp with Bluetooth, a built-in DAC and a phono stage, rated at 45 W/ch into 8 Ω and best matched with efficient speakers in a small room. It scores 77/100 on our BHTR Score, ranking #6 of the 7 amplifiers we track. It is best for small rooms with efficient speakers for TV and music; skip it if you have low-sensitivity speakers or a large room.

What is a cheaper alternative to the Denon PMA-600NE Integrated Amplifier?

The Fosi Audio V3 Amplifier ($100–$200) scores 72/100. A tiny, low-cost Class D stereo amp built on the TI TPA3255 chip, good for powering passive speakers on a budget but bare on inputs and features.