Skip to content
BEST HOME THEATER REVIEW
Klipsch CDT-5650-C II In-Ceiling Speaker

Klipsch ยท In-Wall & Ceiling Speakers

Klipsch CDT-5650-C II In-Ceiling Speaker

83/100 #1 of 10 in-wall & ceiling speakers $180โ€“$300 each

Quick answer

A 6.5-inch Klipsch in-ceiling speaker built around controlled dispersion, the best pick here for Atmos heights paired with Klipsch fronts.

Best forAtmos height channels in Klipsch-based systems
Skip it ifYou're on a tight budget; a budget pair costs less than one of these

Klipsch CDT-5650-C II In-Ceiling Speaker Specs

Type2-way in-ceiling, round, Controlled Dispersion Technology
Drivers6.5-inch woofer with tweeter
Impedance8 ohms
MountingIn-ceiling
Sold asEach

BHTR Score: 83/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Sound quality84
Installation78
Build quality84
Value78

Our Verdict

The CDT-5650-C II is a 6.5-inch two-way in-ceiling speaker from Klipsch's Controlled Dispersion Technology (CDT) line, which is designed to direct sound toward the listening area rather than spray it across the ceiling. It's an 8-ohm design sold individually.

Show the maths. For Dolby Atmos, aiming matters because ceiling speakers sit well off-axis. With an 8 ft (2.44 m) ceiling and seated ears at about 3.3 ft (1.0 m), the ceiling is roughly 4.7 ft above you. A front height at Dolby's ideal 45 degrees goes about 4.7 ft in front of the seat. That puts your ears 45 degrees off the speaker's straight-down axis, where many ceiling tweeters lose treble. Directing the output toward the seats keeps height effects crisp.

For 5.1.4, the rear pair goes about 4.7 ft behind the seat, so front and rear heights end up roughly 9.4 ft apart on the ceiling. In a small room where that doesn't fit, use Dolby's 30โ€“55 degree window: at 55 degrees, each pair moves in to about 3.3 ft from the seat, roughly 6.6 ft apart.

Timbre is the other reason to choose it. If your fronts are Klipsch, such as the RP-600M II or RP-8000F II, a Klipsch height speaker keeps overhead effects voiced like the rest of the system. Set heights to Small at 100โ€“120 Hz (crossover basics).

The trade-off: sold individually, it costs well over budget pairs. See our best in-wall speakers for home theater and Klipsch home theater review.

Pros

  • Controlled dispersion directs sound toward seats
  • Matches Klipsch front speakers' voicing
  • Solid build quality
  • Easy 8-ohm load

Cons

  • Sold individually, so four cost a lot
  • Open-back bass depends on the cavity
  • Overkill for background music

Alternatives to the Klipsch CDT-5650-C II In-Ceiling Speaker

Compare the Klipsch CDT-5650-C II In-Ceiling Speaker

Klipsch CDT-5650-C II In-Ceiling Speaker FAQ

Is the Klipsch CDT-5650-C II good for Dolby Atmos?

Yes. Its controlled dispersion design helps aim treble toward the seats, which matters because ceiling speakers sit 45 degrees or more off-axis from your ears. It also matches the voicing of Klipsch front speakers.

Is the CDT-5650-C II sold as a pair?

No, it's sold individually, so the price band here is per speaker. A 5.1.4 layout needs four.

Is the Klipsch CDT-5650-C II In-Ceiling Speaker worth it?

A 6.5-inch Klipsch in-ceiling speaker built around controlled dispersion, the best pick here for Atmos heights paired with Klipsch fronts. It scores 83/100 on our BHTR Score, ranking #1 of the 10 in-wall & ceiling speakers we track. It is best for atmos height channels in Klipsch-based systems; skip it if you're on a tight budget; a budget pair costs less than one of these.

What is a cheaper alternative to the Klipsch CDT-5650-C II In-Ceiling Speaker?

The Polk 265-RT In-Wall Speaker ($150โ€“$250 each) scores 80/100. A dual 6.5-inch Polk in-wall speaker with more output than single-woofer in-walls, a solid pick for hidden front left, center and right channels.