
Klipsch · Tower Speakers
Klipsch RP-8000F II Floorstanding Speaker
Quick answer
Klipsch's dual 8-inch horn-loaded tower is rated at 98 dB and 32 Hz, so it hits reference levels on a mid-priced receiver and delivers serious bass even before a subwoofer.
Klipsch RP-8000F II Floorstanding Speaker Specs
| Type | Floorstanding, horn-loaded |
|---|---|
| Drivers | 1-inch titanium LTS tweeter on 90x90 Hybrid Tractrix horn; dual 8-inch Cerametallic woofers |
| Frequency response | 32 Hz–25 kHz ±3 dB |
| Sensitivity | 98 dB (2.83 V / 1 m) |
| Impedance | 8 ohms |
| Recommended power | 150 W RMS / 600 W peak (power handling) |
| Bass loading | Rear Tractrix port |
| Sold as | Each |
BHTR Score: 86/100
Our score weighs the spec sheet, the price band and what owners report over time. See how we score.
Our Verdict
The RP-8000F II pairs a 1-inch titanium tweeter on a 90x90 Hybrid Tractrix horn with two 8-inch Cerametallic woofers and a rear Tractrix port. Klipsch rates it at 32 Hz–25 kHz ±3 dB, 98 dB sensitivity, 8 ohms and 150 W RMS / 600 W peak power handling.
Show the maths. At 98 dB, 1 W produces about 88.5 dB at a seat 3 m (10 ft) away. Reference peaks of 105 dB need just 16.5 dB more, which is about 45 W. A typical 87 dB tower needs 11 dB more power for the same result, which is more than 12 times the wattage (around 560 W). That's why the RP-8000F II is the classic recommendation for people with a mid-priced receiver who want to play films loud (sensitivity explained).
Bass is the other headline. Two 8-inch woofers equal the cone area of one woofer about 8 × √2 ≈ 11.3 inches across, and the ±3 dB rating at 32 Hz is unusually deep for a tower at this price. For music you can run them full-range; for movies, still pair a subwoofer and cross over at 60–80 Hz so the towers stay clean on big effects (crossover basics).
The trade-off is size and voicing. These are big, and the horn's forward treble needs careful toe-in in a lively room.
Match them with the RP-504C II center and RP-600M II surrounds. See where they rank in our best tower speakers for home theater.
Pros
- 98 dB sensitivity: about 45 W reaches 105 dB peaks at 10 ft
- Dual 8-inch woofers rated to 32 Hz (±3 dB)
- Dynamic, punchy sound for action films
- Matches the RP-504C II center
Cons
- Large cabinet dominates small rooms
- Horn treble can be bright in hard rooms
- Sold individually, so a pair costs double the band
Alternatives to the Klipsch RP-8000F II Floorstanding Speaker
Cheaper options
Higher-scoring options
Klipsch RP-8000F II Floorstanding Speaker FAQ
Do the Klipsch RP-8000F II need a subwoofer?
Not for music in most rooms, since they're rated to 32 Hz (±3 dB). For movies, a subwoofer still helps: it handles the LFE channel and lets the towers run at a 60–80 Hz crossover, which keeps them cleaner on loud scenes.
What amplifier power do the RP-8000F II need?
Very little. At 98 dB sensitivity, about 45 W per channel reaches 105 dB reference peaks at 10 ft. Any mid-priced AV receiver is enough; an external amplifier adds little unless your room is very large.
Is the Klipsch RP-8000F II Floorstanding Speaker worth it?
Klipsch's dual 8-inch horn-loaded tower is rated at 98 dB and 32 Hz, so it hits reference levels on a mid-priced receiver and delivers serious bass even before a subwoofer. It scores 86/100 on our BHTR Score, ranking #2 of the 10 tower speakers we track. It is best for medium to large rooms where you want reference-level movie sound from a mid-priced receiver; skip it if your room is small or you prefer a soft, relaxed treble.
What is a cheaper alternative to the Klipsch RP-8000F II Floorstanding Speaker?
The Klipsch R-600F Floorstanding Speaker ($250–$400 each) scores 78/100. An affordable horn-loaded tower with dual 6.5-inch woofers that plays loud on modest receivers, with the bright, forward character Klipsch is known for.
Featured In
- Best Tower Speakers for Home Theater (Best for Big Rooms and Low-Power Receivers)
- Best Klipsch Speakers for Home Theater (Best Klipsch Towers for Big Rooms)