Skip to content
BEST HOME THEATER REVIEW
Klipsch R-1650-C In-Ceiling Speaker

Klipsch ยท In-Wall & Ceiling Speakers

Klipsch R-1650-C In-Ceiling Speaker

70/100 #9 of 10 in-wall & ceiling speakers $70โ€“$130 each

Quick answer

Klipsch's entry-level 6.5-inch in-ceiling speaker, a budget way to add height or background-music speakers with a Klipsch voice.

Best forBudget Atmos heights or background music with Klipsch voicing
Skip it ifYou want premium in-ceiling sound or controlled dispersion

Klipsch R-1650-C In-Ceiling Speaker Specs

Type2-way in-ceiling, round
Drivers6.5-inch woofer with tweeter
Impedance8 ohms
MountingIn-ceiling
Sold asEach

BHTR Score: 70/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Sound quality68
Installation80
Build quality70
Value80

Our Verdict

The R-1650-C is Klipsch's entry-level 6.5-inch two-way in-ceiling speaker, sold individually with an 8-ohm rating. It's aimed at simple installs: Dolby Atmos height channels in a budget Klipsch system, or background music in a kitchen or living area.

Show the maths. Speaker wire is the overlooked part of ceiling installs, because runs from the receiver to the ceiling get long. Copper wire resistance per 1,000 ft is roughly 4.0 ohms for 16 AWG, 2.5 for 14 AWG and 1.6 for 12 AWG. A 50 ft run is 100 ft of conductor round trip:

  • 16 AWG adds about 0.4 ohm, a loss of about 0.4 dB into 8 ohms.
  • 14 AWG adds about 0.25 ohm, about 0.27 dB.

A common rule of thumb is to keep wire resistance below 5% of the speaker's impedance, so 16 AWG is fine up to about 50 ft for an 8-ohm speaker, and 14 AWG is the safer choice beyond that. Use in-wall rated (CL2 or CL3) cable.

For height placement, with an 8 ft ceiling and ears at 3.3 ft, the ceiling is about 4.7 ft above you. Dolby's 30โ€“55 degree front-height window places the speakers between about 3.3 and 8.2 ft in front of the seat. Set a 100โ€“120 Hz crossover.

The trade-off: build and refinement are basic, and the CDT-5650-C II directs sound to the seats better. See our best in-wall speakers for home theater.

Pros

  • Low price for a Klipsch in-ceiling
  • Easy 8-ohm load
  • Works for heights or background music
  • Simple installation

Cons

  • Sold individually
  • Basic build and refinement
  • Open-back bass depends on the cavity

Alternatives to the Klipsch R-1650-C In-Ceiling Speaker

Klipsch R-1650-C In-Ceiling Speaker FAQ

What wire gauge should I use for in-ceiling speakers?

For runs up to about 50 ft to an 8-ohm speaker, 16 AWG is fine. Beyond that, use 14 AWG to keep losses low. Make sure the cable is rated for in-wall use (CL2 or CL3) to meet building codes.

Is the Klipsch R-1650-C good for Atmos?

It's a reasonable budget option for height channels, especially in Klipsch systems where the voicing matches. Pricier models like the CDT-5650-C II do a better job of directing sound toward the seats.

Is the Klipsch R-1650-C In-Ceiling Speaker worth it?

Klipsch's entry-level 6.5-inch in-ceiling speaker, a budget way to add height or background-music speakers with a Klipsch voice. It scores 70/100 on our BHTR Score, ranking #9 of the 10 in-wall & ceiling speakers we track. It is best for budget Atmos heights or background music with Klipsch voicing; skip it if you want premium in-ceiling sound or controlled dispersion.