
Klipsch · Tower Speakers
Klipsch R-600F Floorstanding Speaker
Quick answer
An affordable horn-loaded tower with dual 6.5-inch woofers that plays loud on modest receivers, with the bright, forward character Klipsch is known for.
Klipsch R-600F Floorstanding Speaker Specs
| Type | Floorstanding, horn-loaded |
|---|---|
| Drivers | 1-inch aluminum LTS tweeter on Tractrix horn; dual 6.5-inch spun-copper IMG woofers |
| Impedance | 8 ohms |
| Bass loading | Rear port |
| Sold as | Each |
BHTR Score: 78/100
Our score weighs the spec sheet, the price band and what owners report over time. See how we score.
Our Verdict
The R-600F is the smaller tower in Klipsch's current Reference line: a 1-inch aluminum tweeter on a Tractrix horn plus two 6.5-inch spun-copper woofers, in an 8-ohm design. Like the rest of the Reference range, its horn makes it far more sensitive than a typical dome-tweeter tower, which is the key to its appeal on a budget receiver.
Show the maths. Two 6.5-inch woofers have the same cone area as one woofer about 6.5 × √2 ≈ 9.2 inches across. That's enough to fill a medium room with midbass and handle a lower crossover than a bookshelf. On sensitivity, the rule is simple: every 3 dB above a typical 87 dB tower halves the power you need, and 6 dB cuts it to a quarter. Horn-loaded Klipsch towers sit comfortably in that territory, so an entry-level AVR's real-world 50–60 W per channel goes a long way (sensitivity explained).
For movies, still use a subwoofer: set the towers to Small at 60–80 Hz so low-frequency effects go to the sub and the towers keep their headroom for dialogue and music (crossover basics).
The trade-off is character. The horn gives punchy, forward sound that suits action films but can sound bright in a room with bare floors.
Match it with the R-50C center and R-50M bookshelves as surrounds. If you can stretch, the RP-8000F II is a big step up in bass and refinement. Compare towers in our best tower speakers for home theater.
Pros
- Horn-loaded design plays loud on modest receivers
- Dual 6.5-inch woofers equal the area of one ~9.2-inch cone
- Easy 8-ohm load
- Matches the R-50C center and R-50M
Cons
- Treble can sound bright in hard-surfaced rooms
- Vinyl-wrapped cabinet
- Still benefits from a subwoofer for movies
Alternatives to the Klipsch R-600F Floorstanding Speaker
Higher-scoring options
Compare the Klipsch R-600F Floorstanding Speaker
Klipsch R-600F Floorstanding Speaker FAQ
Do the Klipsch R-600F need a subwoofer?
For music, they can play without one in a medium room. For movies, add a subwoofer and set the towers to Small at 60–80 Hz. That sends deep effects to the sub and gives the towers more clean headroom for dialogue.
Are the Klipsch R-600F sold as a pair?
Klipsch towers are typically sold individually, so check the listing and budget for two. The price band here is per speaker.
Is the Klipsch R-600F Floorstanding Speaker worth it?
An affordable horn-loaded tower with dual 6.5-inch woofers that plays loud on modest receivers, with the bright, forward character Klipsch is known for. It scores 78/100 on our BHTR Score, ranking #7 of the 10 tower speakers we track. It is best for budget 5.1 systems on entry-level receivers in medium rooms; skip it if you prefer a smooth, laid-back sound or have a very bright room.
What is a cheaper alternative to the Klipsch R-600F Floorstanding Speaker?
The Dayton Audio Classic T65 Tower Speakers ($200–$250 per pair) scores 68/100. A budget tower pair with dual 6.5-inch poly woofers, a 1-inch silk dome tweeter at ear level and 150 W power handling in a 39-inch bass reflex cabinet.