Skip to content
BEST HOME THEATER REVIEW
Klipsch R-50C Center Channel Speaker

Klipsch · Center Channel Speakers

Klipsch R-50C Center Channel Speaker

77/100 #6 of 8 center channel speakers $200–$350 each

Quick answer

A horn-loaded dual-woofer center that makes dialogue crisp and loud on modest receivers, and the natural match for Klipsch Reference fronts.

Best forBudget Klipsch Reference systems that need clear, loud dialogue
Skip it ifYour seats sit far off to the sides or your fronts aren't Klipsch

Klipsch R-50C Center Channel Speaker Specs

Type2-way center channel, horn-loaded
Drivers1-inch aluminum LTS tweeter on Tractrix horn; dual 5.25-inch spun-copper IMG woofers
Impedance8 ohms
Sold asEach

BHTR Score: 77/100

Our score weighs the spec sheet, the price band and what owners report over time. See how we score.

Dialogue clarity78
Timbre matching84
Ease to drive90
Value78

Our Verdict

The R-50C uses a 1-inch aluminum tweeter on a Tractrix horn flanked by two 5.25-inch spun-copper woofers, in an 8-ohm design. Its job is simple: match the tweeter character of the R-50M and R-600F so voices don't change tone as they pan across the screen.

Show the maths. The horn is why it works for a wide sofa. Klipsch's Tractrix horns are designed for roughly 90 degrees of horizontal coverage, which is ±45 degrees. At a 3 m (10 ft) seating distance, that covers a row 2 × 3 × tan(45°) = 6 m wide, more than any living-room sofa. Within that window, treble stays consistent, so dialogue sounds clear from the end seats too.

The dual-woofer layout has a known limit. With woofers roughly 20 cm (8 inches) apart, a seat 30 degrees off-axis hears one woofer about 10 cm later than the other. That's half a wavelength at about 1.7 kHz (343 ÷ 0.2), where the woofers partly cancel. Owners who sit far off-center may hear voices thin out slightly; the fix is to keep seating within about ±20 degrees.

Placement matters too. If the center sits on a stand 0.6 m high and your ears are at about 1.0 m, tilt it up roughly 7–8 degrees at a 3 m seat (atan 0.4/3).

The trade-off: the RP-504C II is a big step up in size and refinement. See all options in our best center channel speaker for home theater.

Pros

  • Horn tweeter matches Klipsch Reference fronts
  • Crisp, forward dialogue at low power
  • Horn's ~90-degree coverage suits wide rows
  • Easy 8-ohm load

Cons

  • Dual-woofer layout can thin voices far off-axis
  • Bright character in hard-surfaced rooms
  • Less refined than the RP-504C II

Alternatives to the Klipsch R-50C Center Channel Speaker

Klipsch R-50C Center Channel Speaker FAQ

Which speakers match the Klipsch R-50C?

The current Klipsch Reference models, such as the R-50M bookshelf and R-600F tower. They share an aluminum tweeter on a Tractrix horn, so voices keep the same tone as they move between left, center and right.

Should I angle my center channel speaker?

Yes, if it sits well below or above ear height. Aim the tweeter at your ears: a center 0.4 m below ear height at a 3 m seat needs about 7–8 degrees of upward tilt. Foam wedges or an angled stand do the job.

Is the Klipsch R-50C Center Channel Speaker worth it?

A horn-loaded dual-woofer center that makes dialogue crisp and loud on modest receivers, and the natural match for Klipsch Reference fronts. It scores 77/100 on our BHTR Score, ranking #6 of the 8 center channel speakers we track. It is best for budget Klipsch Reference systems that need clear, loud dialogue; skip it if your seats sit far off to the sides or your fronts aren't Klipsch.

What is a cheaper alternative to the Klipsch R-50C Center Channel Speaker?

The Polk Monitor XT35 Center Channel Speaker ($120–$200 each) scores 76/100. A budget dual-woofer center that matches the Monitor XT range's Terylene tweeter, a sensible pick for affordable 5.1 systems.