
Outlaw Audio · Amplifiers
Outlaw Audio 5000x
Quick answer
A five-channel power amp rated at 120 W/ch into 8 Ω and 180 W/ch into 4 Ω, with XLR and RCA inputs and a 12 V trigger, the value way to power a full 5.1 front stage and surrounds.
Outlaw Audio 5000x Specs
| Channels | 5 |
|---|---|
| Power (rated) | 120 W/ch into 8 Ω; 180 W/ch into 4 Ω (20 Hz–20 kHz, <0.02% THD) |
| Inputs | Balanced XLR and differential-sensing RCA |
| Features | 12 V trigger, per-channel rectification and protection relays, 111 dBA signal-to-noise ratio, 5-year warranty |
| Dimensions | 5.82 x 17 x 16.75 in (H x W x D) |
BHTR Score: 83/100
Our score weighs the spec sheet, the price band and what owners report over time. See how we score.
Our Verdict
The 5000x powers the five speakers that carry most of a movie: front left, center, right and two surrounds. Outlaw rates it at 120 W/ch into 8 Ω and 180 W/ch into 4 Ω, 20 Hz–20 kHz, under 0.02% THD. Inputs are balanced XLR and hum-rejecting RCA, a 12 V trigger wakes it with your receiver, and each channel has its own rectification and protection relay.
Show the maths. Loudness at 1 m = sensitivity + 10 × log10(watts). With an 88 dB sensitivity center, 120 W gives 88 + 20.8 = 108.8 dB at 1 m and about 99 dB at a 3 m seat. Against a receiver channel rated at 80 W, that is 10 × log10(120 ÷ 80) = 1.8 dB more headroom, and the 4 Ω rating adds another 1.8 dB for speakers with low impedance.
Where it fits. In a 5.1.4 or 7.1.4 build, the 5000x takes the five ear-level mains and the receiver keeps only the heights (and rear surrounds in 7.1.4). That halves the load on the receiver's supply. You need pre-outs for all five channels; nine-channel models like the Denon AVR-X3800H have them.
If you want all seven ear-level channels covered, step up to the Outlaw Audio 7000x. If your room is large and your speakers are inefficient, the Monolith 5x200 adds 2.2 dB per channel. See the best home theater amplifier guide.
Pros
- 120 W/ch into 8 Ω and 180 W/ch into 4 Ω
- Balanced XLR and RCA inputs
- 12 V trigger and per-channel protection relays
- Five-year warranty
Cons
- Needs a receiver with pre-outs for five channels
- Listing does not say how many channels are driven for the rating
- About 18 inches deep with the cord fitted
Alternatives to the Outlaw Audio 5000x
Cheaper options
Higher-scoring options
More from Outlaw Audio
Outlaw Audio 5000x FAQ
What is a five-channel amplifier used for in home theater?
It powers the five ear-level speakers, front left, center, right and two surrounds, from a receiver's pre-outs. The receiver then only has to power the height channels, which leaves its supply more in reserve.
Is 120 watts per channel enough?
For most rooms, yes. With 88 dB speakers, 120 W gives about 109 dB at 1 m and around 99 dB at a 3 m seat, which covers loud movie peaks in a typical living room.
Is the Outlaw Audio 5000x worth it?
A five-channel power amp rated at 120 W/ch into 8 Ω and 180 W/ch into 4 Ω, with XLR and RCA inputs and a 12 V trigger, the value way to power a full 5.1 front stage and surrounds. It scores 83/100 on our BHTR Score, ranking #2 of the 7 amplifiers we track. It is best for powering the five ear-level speakers of a 5.1.x or 7.1.4 system on a sensible budget; skip it if your receiver lacks pre-outs, or you need seven amplified channels.
What is a cheaper alternative to the Outlaw Audio 5000x?
The Yamaha A-S501 Integrated Amplifier ($500–$700) scores 80/100. An 85 W/ch stereo integrated amp with a built-in DAC, phono stage and subwoofer output, a good base for a 2.1 TV and music system.
Featured In
- Best Home Theater Amplifier (Best Overall (Best 5-Channel Amp))